How far apart should solar lights be placed? Buying solar lights for use is not only for lighting, but it also has many other effects. If you choose the lamp or install it in the wrong position, the illumination will not be up to the standard.
Placing too many lights to light is also not good, and both cause heat and waste energy consumption. Especially the distance to install solar lights must be reasonable, which will ensure to provide us with the best brightness at the lowest cost.
How far apart should solar lights be placed?
Manufacturers of solar lights have made general recommendations about the installation distance of solar lights. It is the number from 1.8m to 2.4m is the most ideal. This level will ensure enough brightness along with installation costs, buying the most economical lights.
But in fact, we can still pull them a little closer if we want to create a more vivid effect. And if there are already existing street lights around the area where the solar lights are installed, the distance should be extended further. And with areas that are too murky, with lots of trees, it’s not safe to rethink the number and spacing of lights to increase illumination.
An important factor that affects the distance to install solar lights is the quality of the product. If the lamp does not work according to the parameters stated on the package, the light effect produced will be poor. Therefore, the best way is that we should prioritize buying genuine products. This will help ensure that the indicators are up to the prescribed standards. It can be based on the lumen index to know the lamp’s brightness, and the higher this number, the brighter the light.
Apply different lighting techniques
Besides paying attention to the distance to install solar lights, the position of the lamp’s projection direction is also quite important. It greatly affects the light rays that will shine out according to the user’s wishes.
Projection direction down
If we install the light in a slightly high position, we can try to direct the light down, and the light source supplied from the top will spread further. Thereby creating safety for the area. The product commonly used for this lighting direction is a large floodlight with a longer installation distance of the solar light. And it is often installed in places such as football fields, gardens, parking lots.
The upward direction can be roughly understood as the light source that will reflect from the ground upwards. This way of positioning and installing solar lights is often used mainly to create a more beautiful landscape effect. It could be placing the projection from the bottom up and shining on a tree trunk, a rockery or a prominent garden highlight.
You can choose a beam-shaped lamp placed under the root for green trees, trees with tiny roots, and shine directly on the tree. With more giant trees, more lights can be combined. And can be placed a distance away from the tree with a 45-degree projection angle will make the tree landscape more vivid.
Diagonal lighting direction
To create a diagonal light direction, we have to use two or even more shadows simultaneously to shine on an object. As a result, this projection object will receive the lightest source. Thereby creating soft shadow effects that add shimmer to the surrounding space. With diagonal direction, we should use wide headlights or diffuser lights. And pay attention to the details of the solar light installation distance of these beams that must intersect before they both illuminate an object.
Focus projection direction
Of all the lighting angles of space, there will be an object that receives the lightest rays. That is the focal angle. If we apply this projection, we need to be careful and consider creating a beautiful highlight. For houses with gardens and large gardens, this projection method should not be ignored.
The direction of drop projection
This drop direction is caused by the effect of a light source. The placement and spacing of this solar light must create an interesting texture on a given surface. It could be a wall, a door or a fence. Note the distance between the light source and the illuminated object. They should be about 8-10cm apart. Furthermore, they have to be edited to direct the projection onto the surface.
There are also many other types of lighting design such as focused and single object lighting, shadow projection… you can unleash your creativity to make your outdoor space impressive at night.